Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments.
It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands.
Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance. The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, The auto environment compensation system greatly improves adaptability of the splicer to hostile environments, so that low-loss splice can be remained consistent in various environments.
Specification of Fusion Splicer
|Model||6481 Optical Fiber Fusion Splicer|
|Alignment Method||Cladding alignment , manual alignment|
|Applicable Fibers||Any common optical fibers , rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651 ~ 653 , ITU-TG.655 and ITU-TG.657|
|Optical Fiber Diameter||Cladding : 80 ~ 150μm , coating layer : 0.1 ~ 3mm|
|Cleave Length||5 ~ 16mm（coated optical fiber diameter ≤ 250μm）；10mm（coated optical fiber diameter：0.25~3mm）|
|Splice Loss ( typical )||0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF）|
|Return Loss||Better than 60dB|
|Splicing Time ( typical )||7s ( Fast mode )|
|Heating Time ( typical )||18s（60mm protectionn sleeve）|
|Tension||1.96 ~ 2.25N|
|Protection Sleeve||60mm , 40mm and a series of protection sleeves|
|Graphical Display||High-performance 4.3-inch LCD|
|Magnification Time||320 times / 88 times|
|Fusion Records||10000 groups|
|Battery Capacity||11.1V , 5200mAh|
|Battery Service Life||Cycle charging : 300 ~ 500 counts , can be replaced by customers|
|Electrode service Life||Typical : 4000 counts , can be replaced by customers|
|Construction Lighting||Built-in lights with high-brightness and wide lighting area|
|Working Environment||Temp : -10 ~ 50℃ ；Hum : 0 ~ 95% RH，height above sea level : 0 ~ 6000m|
|Operation Interfaces||GUI ( Graphical User Interfaces )|
|External Power||AC : 100 ~ 240V , 60Hz , 0 ~ 1.5A ; DC : 10 ～ 15V|
|Port||USB / SD|
|Dimensions||120mm (W) × 130mm (H) × 154mm (D) ( without rubber anti-vibration pad ）|
|Weight||1.7kg ( the battery not included ) , 2.0kg ( included the battery )|
Aplications of Fusion Splicer
- Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily.
- Its capable of construction and maintenance of optical fiber line projects ( including trunk ) , emergency repair, production and test of optical fiber devices and research and study in institutes.