Fusion Splicer

Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments.

It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands.


Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance. The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, The auto environment compensation system greatly improves adaptability of the splicer to hostile environments, so that low-loss splice can be remained consistent in various environments.

Specification of Fusion Splicer

Model6481 Optical Fiber Fusion Splicer
Motor Qty4
Alignment MethodCladding alignment , manual alignment
Applicable FibersAny common optical fibers , rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651 ~ 653 , ITU-TG.655 and ITU-TG.657
Optical Fiber DiameterCladding : 80 ~ 150μm , coating layer : 0.1 ~ 3mm
Cleave Length5 ~ 16mm(coated optical fiber diameter ≤ 250μm);10mm(coated optical fiber diameter:0.25~3mm)
Splice Loss ( typical )0.02dB(SMF); 0.01dB(MMF); 0.04dB(DSF); 0.04dB(NZDSF)
Return LossBetter than 60dB
Splicing Time ( typical )7s ( Fast mode )
Heating Time ( typical )18s(60mm protectionn sleeve)
Tension1.96 ~ 2.25N
Protection Sleeve60mm , 40mm and a series of protection sleeves
Graphical DisplayHigh-performance 4.3-inch LCD
Magnification Time320 times / 88 times
Fusion Records10000 groups
Remote MaintenanceN/A
Battery Capacity11.1V , 5200mAh
Battery Service LifeCycle charging : 300 ~ 500 counts , can be replaced by customers
Electrode service LifeTypical : 4000 counts , can be replaced by customers
Construction LightingBuilt-in lights with high-brightness and wide lighting area
Working EnvironmentTemp : -10 ~ 50℃ ;Hum : 0 ~ 95% RH,height above sea level : 0 ~ 6000m
Operation InterfacesGUI ( Graphical User Interfaces )
External PowerAC : 100 ~ 240V , 60Hz , 0 ~ 1.5A ; DC : 10 ~ 15V
PortUSB / SD
Dimensions120mm (W) × 130mm (H) × 154mm (D) ( without rubber anti-vibration pad )
Weight1.7kg ( the battery not included ) , 2.0kg ( included the battery )

Aplications of Fusion Splicer

  • Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily.
  • Its capable of construction and maintenance of optical fiber line projects ( including trunk ) , emergency repair, production and test of optical fiber devices and research and study in institutes.