ARCoptix FT IR Rocket
Mid-IR Fourier-transform spectrometer (2-6 or 2-12 µm)
If you are looking for high performance & compact Mid-IR spectrometer, that can operate both free-space or with IR optical fibers, the ARCoptix FT IR Rocket is the instrument that you need. Thanks to its permanently aligned interferometer and solid-state reference laser, the FT-MIR Rocket offers excellent stability in both intensity and wavelength scales. Two spectral ranges are available, depending on your needs for high sensitivity or broad spectral range.
Specification
| Models | FT-MIR 2-6 |
|---|
| Beam-splitter material | CaF2 | ZnSe |
| Spectral Range [cm-1] | 5000 - 1700 | 5000 - 830 |
| Spectral Range [μm] | 2-6 | 2-12 |
| Detector Type | MCT (2-TE cooled) | MCT (4-TE cooled) |
| Detector D* [cm Hz1/2W-1] | >1x1011 | >2.5x109 |
| SNR | > 1:5'000i | > 1:3'000ii |
| Recommended fiber | CIR (chalcogenide) fibers (1-6μm) | PIR (polycrystalline) fibers (3-18μm) |
| Interferometer type | Permanently aligned, double retro-reflector design |
| Resolution (unapodized) [cm-1 ] | 4 |
| Wavenumber repeatability | <10PPM |
| Scan frequency | 1 spectrum / second |
| Control laser | Temperature-stabilized solid-state laser @850nm |
| A/D Converter | 24 bit |
| Amplifier | 4 gain levels low noise trans-impedance amplifier |
| Operating temperature | 10°C-40°C |
| Free-space interface | Ø 12.7mm collimated (max ~30mrad half angle) |
| Removable fiber-optic coupler | Fiber core up to Ø 1mm, NA=0.25, SMA 905 connector |
| Purge gas connectors | 2 connectors for 4mm OD tubes |
| Power requirement | 7.5V-12V / 6W |
| Communication Interface | USB 2.0 |
| Software Interface | Windows XP/7/8 |
| API for controlling the instrument via our DLL | |
| Dimensions | 180mm x 160mm x 80mm |
| Weight | 1. |
Benefits
- Two detector choices: 2-6µm or 2-12µm
- Very good sensitivity (2-stage & 4-stage cooled MCT detectors)
- High resolution of 4cm-1
- Excellent stability in intensity and wavelength
- Removable fiber coupler for operation with fibers or free-space IR beams
Applications Of FT-IR Spectrometer
- Mid-IR Optical Spectrum Analyzer (OSA) for MIR Lasers & LED
- Liquid, thin-film or gas measurement
- Material identification and quantification in various fields such as geology
- Food and beverage industry
ARCoptix FT NIR Rocket 0.9-2.6µm
Fibered near-infrared Fourier-transform spectrometer
The HR4000CG-UV-NIR spectrometer is perfect for applications where fast measurements and high resolution are needed.
If you are looking for high performance, compact and affordable NIR spectrometer, the ARCoptix FT-NIR Rocket is the instrument that you need. Thanks to its permanently aligned interferometer and solid-state reference laser, the FT-NIR Rocket offers excellent stability in both intensity and wavelength scales. The FT-NIR Rocket fibered spectrometer is compatible with light sources and sampling accessories typically used with array-detector based NIR spectrometers. Experience the high-quality spectra of our FT-NIR!
Specification
| Interferometer type | Permanently aligned with dual retro-reflector |
| Detector | Extended type InGaAs photodiode |
| (Optionally 1- or 2-stage TE-cooled) | |
| Reference laser | Solid-state, 680nm |
| (optionally TE temperature stabilized) | |
| Spectral range | 0.9−2.6µm (11000−3850cm-1) i |
| Resolution | 8 cm-1 (optionally 4cm-1) |
| Minimum measurement cycle time | 1 sec |
| Signal-to-noise ratio (SNR) | >10’000:1ii |
| Wave number repeatability | <10 PPM with optional temperature stabilized control laser iii |
| Optical fiber input | SMA 905 connector, up to 1mm fiber core |
| diameter, NA=0.25 | |
| Communication interface | USB 2.0 |
| Power requirements | 7.5-12V (1-6W depending on versions) |
| Software interface | Windows XP/Vista/7/8 software |
| Operating temperature / humidity | 5 to 35C / non condensing |
| Storage temperature | -10 to 60C |
| Dimensions | 180mm x 126mm x 78mm |
| Weight | 1.7 KG |
Benefits
- Broad wavelength range 0.9-2.6µm
- High resolution of 8cm-1 (<1nm@1µm to <5nm@2.5 µm)
- Excellent stability in intensity and wavelength
- Very good sensitivity (very well adapted for diffuse reflectance)
- Very compact and rugged, easy to use
Applications Of FT-NIR Spectrometer-Arcoptix
- Transmission, diffuse reflectance
- Light source measurement (NIR Lasers, LED, Solar,…)
- Material identification and quantification in various fields such as geology
- Food and beverage industry