ORNET

Spectrometer for Gas Detection UV Flue Gas Analyzer

UV Flue Gas Analyzer

The UV flue gas analyzer is the latest innovation in online gas analysis equipment, designed for both environmental protection and industrial control applications worldwide.

GF360 UV Flue Gas Analyzer

Description

The  UV flue gas analyzer is the latest online gas analysis equipment for environmental protection and industrial control at home and abroad.

Using advanced UV absorption spectroscopy and differential absorption spectroscopy principles on an advanced optical technology platform, it can analyze and measure online the concentrations of multiple gases including SO2, NO, O2, NO2, CO, CO2, etc. The standard model can simultaneously measure three gas components, SO2, NO, and NO2, and supports component expansion. A UV flue gas analyzer can measure up to five components simultaneously.

This product has the characteristics of high measurement accuracy, high reliability, fast response time, and a wide range of applications. It is widely used in online gas analysis of fixed pollution sources, petrochemical environmental gas analysis, industrial process gas analysis and other fields.

GF360 Real-time Multi-Gas Measurement Analyzer

     FEATURES

  • Using ultraviolet absorption spectrum gas analysis technology, the measurement accuracy is completely unaffected by moisture and dust, with low detection limit and small temperature drift.
  • The gas chamber of the analyzer is made of stainless steel, and no mirror polishing or gold plating is required inside, so it is not affected by moisture and dust.
  • The spectrometer, light source and gas chamber are connected by optical fiber, which is easy to replace and has low maintenance cost.
  • No optical moving parts, anti-vibration, and high reliability of measurement results.
  • Pulse xenon lamp, 109 measurements, long life and high stability.
  • Modular design, good scalability and easy maintenance.

     APPLICATION

  • Continuous monitoring of flue gas emissions in power plants CEMS (analysis of SO2, NO, NO2, O2).
  • Desulfurization process monitoring (analysis of SO2, O2).
  • Denitrification process monitoring (analysis of NO, NO2, NH3, O2).
  • Continuous monitoring of flue gas emissions from garbage incineration (analysis of SO2, NO, NO2, O2).
  • Chlor-alkali plant PVC process and titanium dioxide production process trace Cl2 analysis (analysis of Cl2).
  • Sulfur recovery process gas analysis (analysis of SO2, H2S).
  • Natural gas purification process gas analysis (analysis of trace H2S).
  • Coal chemical methyl iodide analysis (analysis of CH3I).
  • Atmospheric online monitoring (analysis of SO2, NO2, O3, etc.).


Parameter

Detection principleSO2, NO, NO2: DOAS
O2: Electrochemical Principle
CO, CO2: NDIR
Detection objectSO2, NO, NO2, O2, CO, CO2
Detection rangeSO2, NOx: 0-50ppm; 0-300ppm; 0-3000ppm; 3000ppm and above
O2: 0-25%
CO: 0-200-5000-10000ppm
CO2: 0-100%
Analog output signalDC4-20mA, 4 channels, configurable
Analog input signalDC4-20mA, 2 channels, configurable
Digital input6 channels, configurable
Switch output14 channels, configurable
Power supplyRated voltage: 220V
Rated power100W
Working environment-10 to 50 °C; below 90%RH, no condensation
Dimensions19 inches*4U*360mm
19 inches*3U*360mm
Upper and lower limit alarmsOutput alarm signals according to the preset alarm upper and lower limits. When the measured concentration value of each component exceeds the alarm upper limit or is lower than the alarm lower limit, the instrument will issue an alarm signal
Communication functionTwo-way RS-232/RS-485
Repeatability1%
Linearity±2%F.S
Zero drift±2%F.S/week
Range drift±2%F.S/week
Response time10S
Flow rate0.5-1L/min
Standard gasZero gas: Dry N2
Span gas: Concentration of 60-100% relative to the range of each component being measured (recommended). Concentrations exceeding 100% cannot be used.

Accessories List

NO.ItemsQuantityOptional/Standard
1Ultraviolet flue gas analyzer1Standard
2Power adapter1Standard
3Instruction manual1Standard