HR2000 SPECTROMETER
The HR2000+CG spectrometer is perfect for applications where fast measurements and high resolution are needed.
Specification
| Engineering Specifications | HR2000+CG |
| PHYSICAL | |
| Dimensions: (L x W x H) mm and inches | 148.6 x 104.8 x 45.1 mm (5.9 x 4.1 x 1.8 in.) |
| Weight: kg and lb | 0.57 kg (1.26 lbs.) |
| DETECTOR | |
| Type | Sony ILX511B |
| Range | 190 – 1100 nm |
| Quantum efficiency | no |
| SPECTROSCOPIC | |
| Wavelength range | 200-1050 nm |
| Integration time | 1 millisecond – 65 sec |
| Dynamic range | 8.5 x 107 (system); 1300:1 for a single acquisition |
| Signal-to-noise ratio | 250:1 (at full signal) |
| Grating | HC-1 |
| Slit | 5 µm wide |
| Optical resolution | 1.0 nm FWHM |
| Stray light | <0.05% at 600 nm; <0.10% at 435 nm |
| Buffering | no |
| Fiber optic connector | SMA 905 to single-strand optical fiber (0.22 NA) |
| ELECTRONICS | |
| Power consumption | 220 mA at +5 VDC |
| Strobe functions | 2 programmable strobe signals (single/continuous) |
| Interfaces | USB 2.0, 480 Mbps; 2-wire RS-232; I2C 2-wire serial bus |
| Temperature | -30° to +70° C Storage & -10° to +50° C Operation |
| Humidity | 0% – 90% non-condensing |
Applications in which this product is used
- Protein & Nucleic Acid Analysis
- Food & Beverage Quality Control
- Remote Sensing
HR4 pro SPECTROMETER
HR4Pro Spectrometer are compact, high-resolution options distinguished by low stray light performance and great thermal stability for applications in lab, field and process environments. With a robust optical bench design and optimized components, the HR4Pro provides up to 10x improvement in thermal stability compared with similar small-bench spectrometers. Models are available for UV-Vis (200-875 nm), Vis-NIR (350-1025 nm) and extended-range (200-1100 nm) measurements.
Specification
| Engineering Specifications | |
| PHYSICAL | |
| Dimensions: (L x W x H) mm and inches | 148.6 x 104.8 x 45.1 mm (5.9 x 4.1 x 1.8 in.) |
| Weight: kg and lb | 0.57 kg (1.26 lbs.) |
| DETECTOR | |
| Type | Toshiba TCD1304AP |
| Range | 190 – 1100 nm |
| Quantum efficiency | no |
| SPECTROSCOPIC | |
| Wavelength range | 200 – 1100 nm |
| Integration time | 4 milliseconds to 20 seconds (continuous); 10 microseconds to 4 milliseconds (shutter) |
| Dynamic range | 2 X 109 (system); 2000:1 for a single acquisition |
| Signal-to-noise ratio | 300:1 (at full signal) |
| Grating | HC-1, 300 lines per nm grating |
| Slit | 5 µm wide |
| Optical resolution | <1.0 nm FWHM (note: resolution varies at either end of the spectral range) |
| Stray light | <0.05% at 600 nm; <0.10% at 435 nm |
| Buffering | no |
| Fiber optic connector | SMA 905 to single-strand optical fiber (0.22 NA) |
| ELECTRONICS | |
| Power consumption | 450 mA @ 5 VDC |
| Strobe functions | 2 programmable strobe signals (single/continuous) |
| Interfaces | USB 2.0, 480 Mbps; 2-wire RS-232; I2C 2-wire serial bus |
| Temperature | -30° to +70° C Storage & -10° to +50° C Operation |
| Humidity | 0% – 90% non-condensing |
Applications in which this product is used
- Protein & Nucleic Acid Analysis
- Food & Beverage Quality Control
- Remote Sensing